JHD1-1.5 Terminal Blocks
| External Dimensions | ||||
| Width/Thickness/Height(mm) | 45.2/3.5/30.5 | |||
| Stripping Length(mm) | 11 | |||
| Technical parameters | ||||
| Voltage(V) | 500 | |||
| Current(A) | 17.5 | |||
| Cross-section(mm²) | 1.5 | |||
| Wire clamping range | ||||
| Rigid conductor(mm²) | ||||
| Flexible conductor(mm²) | 02-15 | |||
| Terminal | ||||
| Mounting rail | ||||
Can be mounted on a type  guide rail |
TH35-7.5 | |||
| TTH35-15 | ||||
| Partition | ||||
| Used for terminal block terminations to achieve electrical isolation | 1.5G | |||
| Grouping partitions | ||||
| Used for visual and electrical isolation of terminal blocks | ||||
| Test Accessories | ||||
| The test plug and the device are used together for circuit testing. | PS-2 | |||
| Quick-connect connector | ||||
| It can be directly inserted into the center of the terminal to achieve connection between terminals. | 2 Bit | FBS 2-3.5 | ||
| 3 Bit | FBS 3-3.5 | |||
| 4Bit | FBS 4-3.5 | |||
| 5Bit | FBS 5-3.5 | |||
| 10Bit | FBS 10-3.5 | |||
| Marker bar | ||||
| The horizontal and vertical marking bars can be typed in standard numbers from 1 to 600, or according to the technical data provided by the customer. | Blank |  |
Middle | ZB3.5T(Blank) |
| ZB3.5T(Horizontal) | ||||
| Horizontal typing |  |
ZB3.5T(Vertical) | ||
| Both sides | BFM3.5T(Blank) | |||
| Vertical typing |  |
BFM3.5T(Horizontal) | ||
| BFM3.5T(Vertical) | ||||
| End caps | ||||
| Tube-shaped pre-insulated end caps | E1008 | |||
| Tube-shaped bare end caps | EN1508 | |||
With universal mounting feet for standard top-hat(Ω profile) and G-profile DIN rail mounting.