Push-In Type Terminal Blocks Push Fit DIN Rail Solutions

Loose screws, prolonged wiring hours, and cabinet space constraints cost manufacturing facilities thousands each production cycle. Direct leg-spring clamping solves these field challenges instantly. When using a push in type terminal block, wire prep drops to seconds: strip, insert, done.

Operational Advantages Inside Compact Enclosures

Rapid Wire Retention Without Retorquing

Solid conductors or ferruled leads slide directly into the stainless-steel clamping cage. Vibration testing proves that a push fit terminal block eliminates regular maintenance rounds, preventing thermal drift from loose connections.

Integrated Fuse and Indicator Protection

Blown fuses halt automated lines. Utilizing an integrated push in terminal block with a hinged fuse carrier allows immediate fault identification. Integrated status LEDs pinpoint blown links without multimeter probing across every terminal strip.

Technical Specifications

Field Assembly Workflow

Switchboard builders transitioning to push fit din rail terminals achieve clean panel layouts via a four-step sequence:

1. Mount modular blocks directly onto standard TS 35 rail profiles.

2. Strip conductors to the marked gauge length.

3. Push leads firmly into the spring cage until seated.

4. Insert test plugs into upper test slots to verify circuit continuity.

Project Sourcing and Design Support

Evaluating new bill-of-materials components requires physical validation. For modular electrical panels seeking higher packing density, push in type terminal blocks provide certified vibration resistance and repeatable contact pressure.

• CAD and STEP models ready for panel layout software

• Free evaluation samples dispatched within 24 hours

• Direct quotes tailored to cabinet volume requirements

Overall Dimensions
Width / Thickness / Height (mm)			59/6.2/63.5
Stripping Length			13
Technical Parameters
Voltage (V)			500
Electric current (A)			6.3
Section (mm²)			4
Crimping Range
Rigid Wire (mm²)			0.2-6
Flexible Wire (mm²)			0.2-4
Fusible Core			R054 Ф 5*20
Install the Track
Can be mounted on shaped rails.			TH35-7.5
			TH35-15
Partition
Used for terminating terminal blocks to achieve electrical isolation.			4RDG
Test Attachment
Test Plug: Used in conjunction with the corresponding component for circuit testing.			PS-2
Quick-Connect Coupler
It can be inserted directly into the center of the terminal to establish a connection between terminals.		2 Bit	FBS 2-6
		3 Bit	FBS 3-6
		4 Bit	FBS 4-6
		5 Bit	FBS 5-6
		10 Bit	FBS 10-6
		20 Bit
		30 Bit
Marker Strip
The marking strips feature standard horizontal and vertical numbering from 1 to 600; alternatively, numbering can be applied based on technical specifications provided by the customer.	blank		middle	ZB 6 (blank)
	Horizontal Typing			ZB 6 (horizontal)
	Vertical Typing			ZB 6 (vertical)
			Both sides	BFM 6 (blank)
				BFM 6 (horizontal)
				BFM 6 (vertical)
Marking Bracket
For detailed instructions on usage, please refer to the attached section.
End
Tubular Pre-insulated Terminal			E4010
Tubular Non-Insulated Terminal