Buy Multi-level Terminal Blocks High Density Connectors
- Type:
- Multi-conductor terminal block
- Nominal Voltage:
- 800 V
- Nominal Current:
- 32 A
- Number Of Connections:
- 4
- Connection Method:
- Push-in connection
- Rated Cross Section:
- 4 mm²
- Mounting type:
- DIN Rail (EN 60715)
- Compatible Rail:
- NS 35/7,5, NS 35/15
- Cross Section:
- 0.2 mm² - 6 mm²
- Color:
- gray
Cabinet space constraints require compact cabinet wiring architectures. Integrating a multi level terminal into control cabinets consolidates signal lines vertically, saving over 50% horizontal panel space on standard DIN rails.
High-Density Space Optimization and Reliability
Industrial automation systems demand clean wire routing and secure current transmission. Multi-level Terminal Blocks stack two or three connection tiers inside a single housing, streamlining potential distribution across dense cabinet layouts.
-
Footprint Reduction: Tiered levels triple connection points per linear centimeter.
-
Tool-Free Termination: Push-in spring clamp mechanisms cut wiring duration during field assembly.
-
Vibration Resistance: Constant contact pressure prevents wire loosening under mechanical shock.
Selection Criteria for Control Panels
Selecting multi level terminal blocks requires evaluating mechanical properties and electrical thresholds:
-
Housing Material: Polyamide PA66 with UL94 V-0 flame-retardant certification.
-
Rated Parameters: Support for 500V to 800V isolation ratings and up to 24A continuous current.
-
Wire Cross-Section: Compatibility with 0.14 mm² through 4 mm² solid or stranded conductors.
-
Accessories: Plug-in bridges, partition plates, and snap-on marker strips.
Technical Specifications
| Parameter | Specification Standard |
|---|---|
| Mounting Type | DIN Rail NS 35/7.5 |
| Insulation Material | Polyamide (PA66, UL94 V-0) |
| Connection Technology | Push-In Spring Clamp |
| Rated Voltage | 500 V – 800 V |
| Rated Current | 17.5 A – 24 A |
| Cross-Section Range | 0.14 mm² – 4.0 mm² |
Order high-density terminal solutions directly to accelerate control panel builds with certified, vibration-proof performance.
| Wiring Diagram |  |
| Thickness/Witdh/Height | 6.2*77.4*35.5 mm |
| Nominal cross section | 4 mm² |
| Rated current | 32 A |
| Rated voltage | 800 V |
| Color | Gray |
| Insulating material | PA66 |
| Flame retardant rating UL-94 | V0 |
| Connection type | Push-in connection |
| The minimum cross section(Rigid wire) | 0.2 mm² |
| The maximum cross section(Rigid wire) | 6 mm² |
| The minimum cross section(Soft wire) | 0.2 mm² |
| The maximum cross section(Soft wire) | 4 mm² |
| Cover | JHD1-4/2X2G |
| Jumper | FSB 10-6 |
| Marker | ZB6M |
| Dimensions |  |
