DIN Rail Grounding Earth Terminal Blocks
- Type:
- Protective conductor terminal block
- Number Of Connections:
- 2
- Number Of Positions:
- 1
- Connection Method:
- Screw connection
- Cross Section:
- 0.2 mm² - 10 mm²
- Mounting Method:
- PE foot with mounting screw, M4
- Color:
- green-yellow
Electrical control cabinets require dependable potential equalization and surge path grounding. Industrial Grounding Terminal Blocks establish immediate electrical contact with the mounting rail, routing fault currents directly to the enclosure frame without extra wiring.
Operational Safety in Power Distribution
Unstable ground pathways introduce safety hazards and signal noise across industrial automation systems. Integrating a dedicated earth terminal block eliminates loose wiring while offering high short-circuit current withstand capability.
Three Primary Structural Advantages
-
PE Foot Clamp Mechanism: Direct mechanical lock onto standard NS 35 rails delivers low contact resistance.
-
High-Strength Insulation: Flame-retardant, halogen-free PA66 housing protects internal connections against harsh thermal environments.
-
Vibration-Proof Screw Clamp: Industrial layouts utilize grounding terminal blocks to maintain high clamping force under continuous mechanical vibration.
Reliable Connection Solutions from Hangda Electric
Hangda Electric delivers industrial connection solutions compliant with international IEC 60947-7-2 standards.
Installation and Wiring Workflow
-
Snap the din rail ground terminal block onto the steel DIN rail.
-
Tighten the central PE foot screw to establish a low-impedance ground path.
-
Secure incoming conductors ranging from 0.2 mm² to 10 mm² inside the ground block terminal clamping body.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | JHD5-6JD |
| Manufacturer | Hangda Electric |
| Wire Range | 0.2 mm² - 10 mm² |
| Mount Type | NS 35 DIN Rail |
| Housing Material | PA66 (UL 94-V0) |
| Standard | IEC 60947-7-2 |
| Model | Function | Wire IEC cross-section | Wire UL |
| JHD5-6JD |  |
6 mm² 4 mm² 6 mm² |
10 AWG 12 AWG 10 AWG |
| Thickness | Number of packages | Thickness/Height( )/Width mm |
Rated voltage/rated current/rated cross-sectior |
| 8.2 mm | 75 | 8.2/47/42.5 | -/57 A/6 mm² |
Specfication:
| Marking tags | ZB6 |
| Screw/Tightening torque(Nm) | M4/1.2 |
| Material | PA |
| Flame retardant rating UL-94 | V0 |
| Dimensions |  |
With universal mounting feet for standard top-hat(Ω profile) and G-profile DIN rail mounting.
