Feed Through Modular Multi Conductor Terminal Blocks
- Type:
- Multi-conductor terminal block
- Nominal Voltage:
- 800 V
- Nominal Current:
- 24 A
- Number Of Connections:
- 3
- Connection Method:
- Push-in connection
- Rated Cross Section:
- 2.5 mm²
- Mounting type:
- DIN Rail (EN 60715)
- Compatible Rail:
- NS 35/7,5, NS 35/15
- Cross Section:
- 0.14 mm² - 4 mm²
- Color:
- gray
High-density control cabinets demand clean wire management, low contact resistance, and secure feed through terminals mounted on standard DIN rails. Electrical distribution enclosures face severe space restrictions when routing incoming power and sensor signals. Hangda Electric addresses these layout challenges with precision-engineered connection hardware built for machinery, automated process control, and transportation infrastructure.
Solving High-Density Cabinet Wiring Challenges
Compact enclosures frequently suffer from wire congestion, thermal buildup, and tedious maintenance. Implementing multi conductor terminal blocks allows multiple field wires to terminate at a single compact footprint, saving over 40% of panel space.
-
Rapid Cabinet Assembly: Pre-fitted jumper channels enable push-in cross-connections without external bridge plates.
-
Vibration-Proof Clamping: Constant contact pressure prevents wire loosening under severe mechanical shock.
-
Efficient Signal Routing: Integrated test points allow direct probe insertion during loop checks without disconnecting conductors.
Technical Performance and Specifications
Hangda manufactures components compliant with IEC 60947-7-1 standards to ensure operational safety across demanding industrial environments.
| Parameter | Specification |
|---|---|
| Model Series | JHD1.2.5-1/2 |
| Rated Voltage | 800 V |
| Rated Current | 24 A |
| Cross-Section | 0.2 – 2.5 mm² |
| Housing Material | PA66 (UL 94 V-0) |
| Mounting Type | NS 35 DIN Rail |
Streamlined Cabinet Integration with Hangda
Selecting the correct feed through modular terminal block minimizes voltage drops across extended field networks. Hangda delivers reliable feed through terminal blocks manufactured from flame-retardant polyamide housings and high-conductivity copper alloy contact bars.
For installations requiring dense vertical wire stacking, Hangda integrates these units alongside Feed-through Terminal Blocks and multi level terminal blocks to maximize usable enclosure volume.
Actionable Next Steps
-
Review full mechanical dimensions on the Hangda JHD1.2.5-1/2 product page.
-
Request CAD models and compliance certificates directly from Hangda technical support.
-
Order evaluation samples to test conductor pull-out retention and insertion force on your assembly line.
| Wiring Diagram |  |
||
| Thickness / Width / Height (mm) | 5.2×60.8×35.5 | ||
| Technical Parameters | |||
| Rated Data | Voltage (V) | 800 | |
| Current (A) | 24 | ||
| Cross-section (mm²) | 2.5 | ||
| Crimping Range | Rigid Wire (mm²) | 0.2-4 | |
| Flexible Wire (mm²) | 0.2-2.5 | ||
| Insulating Material | PA | ||
| Flame retardant rating UL-94 | V0 | ||
| Stripping Length (mm) | 10 | ||
| Install the Guide Rails | TH35-7.5/TH35-15 | ||
| model | |||
| Partition plate | 1×2G |  |
|
| Plug-in Bridge | 2P | FBS 2-5 |  |
| 3P | FBS 3-5 | ||
| 4P | FBS 4-5 | ||
| 5P | FBS 5-5 | ||
| 10P | FBS 10-5 | ||
| Marker Strip | blank | ZB5 |  |
| Horizontal Printing | ZB5 |  |
|
| Vertical Printing | ZB5 |  |
|
| Dimensions |  |
||
