Push In Type Terminal Block Push Fit DIN Rail
- Type:
- Feed-through terminal block
- Nominal Voltage:
- 1000 V
- Nominal Current:
- 76 A
- Number Of Connections:
- 2
- Connection Method:
- Push-in connection
- Rated Cross Section:
- 16 mm²
- Mounting type:
- DIN Rail (EN 60715)
- Compatible Rail:
- NS 35/7,5, NS 35/15
- Cross Section:
- 0.5 mm² - 25 mm²
- Color:
- gray
Streamlined Panel Assembly with Modern Wiring Solutions
Control cabinet construction requires reliable electrical connections and reduced installation time. Hangda Electric designed the JHD1-16 feed-through model to solve loose wire issues and speed up wiring processes. Utilizing spring-cage connection technology, these Push-In Type Terminal Blocks allow direct insertion of solid conductors or stranded wires with ferrules without special tools.
Technical Performance Specifications
| Parameter | Specification |
|---|---|
| Rated Voltage | 1000 V |
| Rated Current | 76 A |
| Wire Cross-Section | 0.5 - 16 mm² |
| Insulation Material | PA66 (UL94 V-0) |
| Mounting Type | NS 35 DIN Rail |
Operational Advantages for Industrial Cabinets
Reduced Maintenance and High Vibration Resistance
Traditional screw connections loosen under constant mechanical shock. Implementing a push in terminal block provides constant contact pressure against vibration, preventing thermal hot spots and voltage drops.
Accelerated Field Installation
Integrating push fit din rail terminals cuts panel assembly time significantly. Industrial automation control panels benefit from instant verification through built-in test points.
-
Insert pre-stripped wire directly into the push fit terminal block clamp.
-
Depress the orange release lever with an insulated screwdriver to detach connections smoothly.
-
Verify current path using integrated test ports on top of each unit.
Choosing Hangda JHD1-16 units ensures certified IEC 60947-7-1 compliance. Experience faster wiring today with Hangda push in type terminal block solutions built for high-density power distribution.
| Wiring Diagram |  |
|||
| Thickness/ Height / Width (mm) | 12.2/50.6/74 | |||
| Technical Parameters | ||||
| Rated Data | Voltage (V) | 1000 | ||
| Current (A) | 76 | |||
| Cross-section (mm²) | 16 | |||
| Crimping Range | Rigid Wire (mm²) | 1.5-25 | ||
| Flexible Wire (mm²) | 1.5-16 | |||
| Insulating Material | PA | |||
| Flame retardant rating UL-94 | V0 | |||
| Stripping Length (mm) | 22 | |||
| Install the Guide Rails | TH35-7.5/TH35-15 | |||
| model | ||||
| Partition plate | 16G | |||
| Plug-in Bridge | 2P | FBS 2-12 |  |
|
| Marker Strip | blank | ZB10 |  |
|
| Horizontal Printing | ZB10 |  |
||
| Vertical Printing | ZB10 |  |
||
| Dimensions |  |
|||
